Tank Cleaning & Grit Blasting
- Cleaning and sludge removal for safe entry
- Grit blasting to SA2.5 for floor assessment
- Surface preparation for recoating
- Carried out under confined-space controls
Services
Additional Services
The supporting services that keep an inspection programme moving, from access and cleaning through surface preparation and coatings to failure investigation.
What we offer
Our supporting services
An inspection is only as good as the access, preparation and follow-up around it. These services close the gaps so a programme runs without stalling.
Coating Inspection
- Dry film thickness and surface profile
- Adhesion testing
- Holiday and pinhole detection
- Quality assurance before and after application
Rope Access
- Inspection at height without scaffold
- External tank shells and structures
- Dual-rope safety systems
- Rapid deployment, less disruption
Failure Investigation
- Root cause analysis after a failure
- Identifies the failure mode
- Corrosion, cracking, fatigue and defects
- Corrective action to prevent recurrence
One team, less handover
Access, cleaning, surface preparation and coating checks handled alongside the inspection, so nothing waits on a separate contractor.
Ready to inspect
Tanks cleaned, gas freed and grit blasted to a known standard so the inspector assesses bare metal, not scale and sludge.
Access without scaffold
IRATA rope access reaches shells, structures and difficult areas quickly, cutting cost and time off the plant.
Answers after a failure
Root cause analysis that identifies the failure mode and sets out corrective action to stop it happening again.
Discuss your inspection requirements
Speak with our inspection team about tank inspection, integrity assessments and inspection planning. We are here to help.